Coil

• Ø3/8”, Ø1/2” copper tube.
• ‘’V” type aluminum fıns.
• The fınned coils are designed with aluminum fıns spaced at 2,1 or 2,5
mm, crimped onto copper tubes.
• Header inlet and outlet tube connections made of copper.
• Maximum operating pressure 21 bar for standard products.
• Staggered copper tubes.
• The coil circuits are designed for refrigerants R404A, R407F, R449A,
R507C, R22, Rl 34A.
• Different fın spacing can be selected as an option for 1,8mm to 4mm.

Casing

• Electrostatic powder coated RAL 7035 galvanized steel.
• Galvanized Steel, Stainless Steel and Aluminum sheet
• Each fan chamber is separated by internal baffle plates to prevent induced
wind milling of off-cycle fans

Fan

• Ø500-Ø630-Ø800 mm / 230V-50Hz-Monofase 800~ 1250d/d /
400V-50Hz-Trifaze 650~900d/d fans
• Selections should be confırmed by your Buzçelik Technical Specialist
• Standard or low noise level are available.
• Different kinds of motors available as optional. (EC or AC)
• Motor protection IP54 insulation class F
• Different kinds of accessories available as optional. (AxiTop Diffuser,
FlowGrid ete.)
• Working conditions -40°C/+50°C.

Capacity

The nominal capacities calculated according to Eurovent EN328 standards
that refer to ΔT=15°C condition and are valid for R404A.

Options

• Different casing color.
• Other tube wall thicknesses and fın spacing on request.
• Mono phase 220V 1 ~ 50Hz fan or three phase 400V 3~ 50Hz fan.
• Please keep in touch with our sales department about your special
needs that are not mentioned in the catalogue.

Note

• Please read “lnstallation, Operation and Maintenance lnstructions” for
mounting and maintenance.

Accessories

• Casing made of aluminum or stainless steel.
• Epoxy resin coated aluminum fıns.