BES Type Cooler


  • Geometry: 32mm x 28mm
  • Copper Tubes Ø3/8”
  • “V” type aluminium fins.
  • The finned coils are designed with aluminium fins spaced at 6mm crimped onto copper tubes.
  • Maximum operating pressure 21 bar.
  • Staggered copper tubes.
  • The coil circuits are designed for refrigerants R404A, R507F, R449A, R507C, R134A, R407C.
  • Different fin spacing can be selected as an option for 4mm to 12mm.
  • Refrigerant distributor.


  • Electrostatic powder coated RAL 9016 galvanized steel.
  • Stainless steel or aluminum casing as optional.
  • Hinged/Folding drain tray is standard for all models.


  • Selection of a unit cooler with various fan number/diameter combinations offering the dimensional and air throw characteristics best adapted to the size of the cold room or market cooler.
  • Selections should be confirmed by your Buzçelik Technical Specialist.
  • Motor protection IP54 insulation class F.
  • Working conditions -10°C/+50°C.


  • B1 type defrost system suitable for -10°C/+5°C cold room applications.  
  • Defrost heaters are applied on heat exchanger coil.
  • This facility enables homogenous heat distribution for fast and efficient defrosting.

Optional Defrost Options

B1 : Light electric defrost (Coil)
B2 : -
HGD : -
WD : -


  • The nominal capacities calculated according to Eurovent EN328 standards that refer to  SC1-SC2 conditions  and are valid for R404A.


  • Different  casing color.
  • Other tube wall thicknesses and fin spacing on request.
  • Please  keep in touch with our sales department about your special needs that are not mentioned in the catalogue.


  • Casing  made of stainless steel or aluminum.
  • Epoxy resin coated aluminium fins.